Custom Work Rates
Please inquire as to current turnaround time

We offer a full line of lapidary services in our shop including cutting and polishing of your specimens. These services are priced in volume for rock dealers, but we also offer polishing services for private collectors subject to the minimum shop order shown below. Due to the overhead time involved in keeping track of and packaging/invoicing individual orders we cannot accept custom work for orders smaller than the shop minimum.

Please note that at this time we are not accepting any custom sphere or cabachon work - the only bandwidth we have in the shop is for flat polished faces. Thank you.

Minimum shop charge: $50.00
Minimum per piece polish charge: $5.00
Minimum per piece cutting charge: $3.00
Cutting charge up to 24" saw: 25 cents per square inch per cut
Cutting charge for 36" saw: 35 cents per square inch per cut (note minimums)
Polishing charge (flat surfaces): 75 cents per square inch (note minimums)

Example: A walnut sized thunderegg will cost $3 to cut and $10 to polish (two halves). You'd need 4 or so of these to reach the shop minimum charge of $50. Perhaps ironically, you could get a batch of baseball sized thundereggs done for the same price. You could also send us a single 11" diameter petrified wood round which could be lapped & polished for around $60.00

Note that charges assume specimens in good condition ready to be worked. Additional fees may be required for heavily fractured or otherwise troublesome pieces. Contact us at e-mail address below for quotes or other questions regarding these services.

NOTE: We're good, but we're not fast. Minimum turn around time is 6-8 weeks and may be much longer depending on backlog. Patience is rewarded with quality!

Tour the shop
A brief photo tour of our custom built 48" polishing laps - we built them for our own production to produce the finest polish you'll find anywhere!

Mail to Sticks-in-Stones Lapidary

Copyright (c) 1998 - 2012 Sticks In Stones Lapidary - All Rights Reserved